AC Infinity Cloudray T10 Whole House Ec Fan 1200 Cfm Energy Efficient with Temperature Humidity Controller

A whole house fan system designed to be installed in attics to keep homes cool; it exhausts hot air from indoor spaces while creating passive intake to pull in fresh air. Each attic fan is controlled by an LCD digital controller, featuring a smart thermostat with triggers, fan speed control, and status alerts. The fan uses a PWM-controlled EC motor that allows it to run efficiently and quietly at a maximum of 48 dBA. This kit includes 4-layer ducting, stainless steel duct clamps and grille, and a 2-door shutter that blocks attic air from flowing into your home when the fan is not in use.

Features:

• A whole house attic fan designed to cool and ventilate entire homes by exhausting hot air from indoor spaces.
• Smart digital controller with temperature and humidity trigger programming, fan speed control, timers, and alarms.
• Utilizes a PWM-controlled EC motor that results in quieter and more energy-efficient fans than most others.
• Features 2-door shutters with damper that blocks attic air from entering living spaces when fan is not in use.

Intelligent Controller

Featuring active temperature and humidity monitoring, the digital controller has programmable triggers that activate the attic fan when your house gets too hot or humid. The fan can run continuously or on a timer to start and stop when you need it to. Set the whole house fan to custom speeds between 0 and 10 to optimize your desired cooling and noise level. Each smart controller includes a 12 ft. corded sensor probe that detects temperature and humidity in your home. Other features include LCD screen energy-saving mode, backup memory, and alert notifications.

Efficient Performance

The PWM (Pulse Width Modulation) controlled motor not only spins the fan quietly, but also consumes up to 95% less power than air conditioner units. The CLOUDRAY attic fan has a 50,000-hour continuous run lifespan, using dual ball bearings that allow omnidirectional mounting. It is also IP-44 rated to resist dust and moisture while performing in most humid environments. The insulated damper uses gravity-fed shutters that close the opening when the whole house fan is not in use, keeping attic air from entering your home.

Specifications:

• Manufacturer: AC Infinity Inc.
• Product Name: CLOUDRAY T10
• Duct Size: 10"
• Total Dimensions: 9.81 x 15.07 x 11.30 in. (24.9 x 38.6 x 28.6 cm)
• Mounting Hole-To-Hole Distance: 5.90 x 5.90 in. (15.0 x 15.0 cm)
• Screw Hole Size: Ø 0.472 in. (Ø 1.2 cm)
• Cord Length to Controller: 240 in. (20 feet)
• Cord Length to Plug: 96 in. (8 feet)
• Total Dimensions: 5.19 x 2.91 x 1.06 in. (13.2 x 7.4 x 2.7 cm)
• Hole to Hole Distance: 4.71 x 2.64 in. (12.0 x 6.7 cm)
• Screw Hole Size: Ø 0.119 in (Ø 0.3 cm)
• Display Size: 3.5 x 1.4 in. (9 x 3.5 cm)
• Sensor Probe Length: 144 in. (12 feet)
• Total Airflow: 1201 CFM
• Total Noise: 48 dBA
• Static Pressure: 352 Pa
• Voltage: 100-240V AC
• Frequency: 50/60Hz
• Max Power Draw: 250 W
• Average Power Usage: 136 W
• Current: 2.7 A
• Power Connector Type: US Plug (NEMA 1-15 Type-A)
• Wall Adapter Input: 100 to 120V AC
• Operating Humidity: 35 to 85% RH
• Operating Temperature: 0 to 140°F
• Ingress Protection: IP 44
• Fan Bearings: Dual Ball
• Mounting Positions: Horizontal or Vertical
• L10 Life Expectancy: 67,000 Hours
• Fan Quality Approvals: CE, RoHS