Takagi T-D2-OSLP Outdoor Tankless Water Heater Propane
- Save space and provide a higher efficiency
- Giving you the most energy efficient model
- Easy to install and it's easy to maintain
About This Product
The NEW T-D2-IN model was specifically designed for light commercial applications. The T-D2-IN offers all the features of the "Revolutionary T-K3-Pro" model along with a max flow rate of 10.0GPM.
Utilizing HRS35 copper alloy for the heat exchanger tubing, the T-D2-IN/OS is also suited for heavier-residential usages such as space-heating and domestic recirculation systems.
Features
- Fully modulating, gas fired, tankless water heater
- Outdoor installation only
- Safety Features:
- Air-Fuel Ratio (AFR) sensor
- Exhaust & Water Temperature Safety Control
- Overheat Cutoff Fuse
- Internal Freeze-Protection System
- Manual reset high limit switch
- Easy-link up to 4 units without multi unit controller
- HRS 35 Copper on Heat Exchanger
- Temperature Remote Controller included (TM-RE30)
Venting & Combustion
- Non Venting Required
- Electric Ignition
Accessories
- TK-PC01
Pipe Cover - TK-RB02
Recess Box
Downloads:
Download T-D2-IN/OS Manual
Download T-D2-IN Specification Sheet
Download T-D2-OS Specification Sheet
Natural Gas Input | Min. 11,000Btu | Max. 199,000 Btu |
LPG Input | Min. 11,000Btu | Max. 199,000 Btu |
Gas Connection | 3/4" NPT | |
Water Connection | 3/4" NPT | |
Natural Gas Pressure Inlet | Min. 5.0" W.C. | Max. 10.5" W.C. |
LP Gas Pressure Inlet | Min. 8.0" W.C. | Max. 14.0" W.C. |
Weight | 39 lbs | |
Dimensions | 20.5" x 13.8" x 8.5" | |
Ignition | Electronic Ignition | |
Electrical Supply | AC 120V (60 Hz) | |
Water Pressure | Min. 15 psi | Max. 150 psi |
Natural Manifold Pressure | 2.0-2.5" W.C. | |
LP Manifold Pressure | 3.7-4.5" W.C. |